Wood-mizer 1992 LT40HD Operator's Manual download pdf (Page 46)

Setup & Operation

Clamp Extension

2-18 HD92doc042701 Setup & Operation

2.10 Clamp Extension

The clamp extension stored in the battery box or at the end of the clamp tube can be used

for clamping small cants or logs. The clamp extension is used with the hydraulic clamp in

its down position.

Clamp extensions made after 6/92 include a retaining pin which allows the clamp to be

stored on the clamp tube end plate.

See Figure 2-11. Remove the retaining pin and clamp extension from its storage position

at the end of the clamp assembly. Replace the pin in the storage hole.

The clamp should be removed from the clamp and returned to its storage position before

towing the mill.

FIG. 2-11

Remove retaining pin

and clamp extension

from storage position

Slide clamp extension

over lip of

hydraulic clamp

Return retainin

pintostorage

location

HD0018

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 139 140

No comments

Wood-mizer 1992 LT40HD Operator's Manual Page 46